扫一扫，手机浏览- 培养摇瓶SHAKE FLASKS
详细信息
材质：玻璃 成分：见具体描述 规格型号：见具体描述 允许误差：见具体描述 ml 品牌：美国Chemglass 型号：培养摇瓶SHAKE FLASKS 培养摇瓶SHAKE FLASKS:
各种款式摇瓶SHAKE FLASKS，适用于微生物等培养，一般是实验室水平的发酵，发酵量较小，用于实验通途。也是大型发酵前期种子培养的方式。
CLS-2040
SHAKE FLASKS, 3 STANDARD BAFFLES, REINFORCED TOP
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker.
Item Number Item Description PQ CLS-2040-01 Flask, Shake, 125mL, Baffled, Plain Top, Approx OD x Height (mm): 70 x 115 EACH CLS-2040-02 Flask, Shake, 250mL, Baffled, Plain Top, Approx OD x Height (mm): 80 x 135 EACH CLS-2040-05 Flask, Shake, 1000mL, Baffled, Plain Top, Approx OD x Height (mm): 130 x 215 EACH CLS-2040-07 Flask, Shake, 2000mL, Baffled, Plain Top, Approx OD x Height (mm): 155 x 270 EACH
CLS-2042
SHAKE FLASKS, 3 DEEP BAFFLES, REINFORCED TOP
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker.
Item Number Item Description PQ CLS-2042-02 Flask, Shake, 250mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 80 x 135 EACH CLS-2042-04 Flask, Shake, 500mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 100 x 180 EACH CLS-2042-05 Flask, Shake, 1000mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 130 x 215 EACH CLS-2042-07 Flask, Shake, 2000mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 155 x 270 EACH
CLS-2044
SHAKE FLASKS, 3 STANDARD BAFFLES, DELONG NECK
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
Item Number Item Description PQ CLS-2044-01 Flask, Shake, 50mL, Baffled, Delong Neck, Approx OD x Height (mm): 50 x 110 EACH CLS-2044-02 Flask, Shake, 125mL, Baffled, Delong Neck, Approx OD x Height (mm): 70 x 145 EACH CLS-2044-03 Flask, Shake, 250mL, Baffled, Delong Neck, Approx OD x Height (mm): 80 x 155 EACH CLS-2044-05 Flask, Shake, 500mL, Baffled, Delong Neck, Approx OD x Height (mm): 100 x 200 EACH CLS-2044-06 Flask, Shake, 1000mL, Baffled, Delong Neck, Approx OD x Height (mm): 130 x 230 EACH CLS-2044-08 Flask, Shake, 2000mL, Baffled, Delong Neck, Approx OD x Height (mm): 155 x 300 EACH
CLS-2046
SHAKE FLASKS, 3 DEEP BAFFLES, DELONG NECK
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
Item Number Item Description PQ CLS-2046-01 Flask, Shake, 50mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 50 x 110 EACH CLS-2046-02 Flask, Shake, 125mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 70 x 145 EACH CLS-2046-03 Flask, Shake, 250mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 80 x 155 EACH CLS-2046-05 Flask, Shake, 500mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 100 x 200 EACH CLS-2046-06 Flask, Shake, 1000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 130 x 230 EACH CLS-2046-08 Flask, Shake, 2000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 155 x 300 EACH CLS-2046-09 Flask, Shake, 3000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 185 x 340 EACH CLS-2046-10 Flask, Shake, 4000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 205 x 370 EACH
CLS-2048
SHAKE FLASKS, 6 BAFFLES, DELONG NECK
Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
Item Number Item Description PQ CLS-2048-04 Flask, Shake, 250mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 80 x 155 EACH CLS-2048-05 Flask, Shake, 500mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 100 x 200 EACH CLS-2048-06 Flask, Shake, 1000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 130 x 230 EACH CLS-2048-08 Flask, Shake, 2000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 155 x 300 EACH CLS-2048-09 Flask, Shake, 3000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 185 x 340 EACH CLS-2048-10 Flask, Shake, 4000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 205 x 370 EACH
CLS-2050
SHAKE FLASKS, 4 BAFFLES, CONSTRICTION, DELONG NECK
Flask has 4 bottom baffles and a constriction just below the neck to prevent splashing from reaching the closure.
Item Number Item Description PQ CLS-2050-02 Flask, Shake, 250mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height (mm): 80 x 155 EACH CLS-2050-04 Flask, Shake, 500mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height (mm): 100 x 200 EACH CLS-2050-06 Flask, Shake, 1000mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height (mm): 130 x 230 EACH
CLS-2051
SHAKE FLASKS, 3 BAFFLES, GL THREAD, VENTED CAP
Flask has 3 baffles on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. The polypropylene vented caps have a 0.22µm (PTFE) hydrophobic membrane to allow sterile gas exchange while preventing contamination. Since these caps are vented, the flasks can be autoclaved with the cap attached.
Item Number Item Description PQ CLS-2051-02 Flask, Shake, 125mL, 3 Baffles, GL-32 Thread, Vented Cap, Approx OD x Height (mm): 65 x 120 EACH CLS-2051-04 Flask, Shake, 250mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 80 x 125 EACH CLS-2051-06 Flask, Shake, 500mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 100 x 170 EACH CLS-2051-08 Flask, Shake, 1000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 130 x 215 EACH CLS-2051-10 Flask, Shake, 2000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 170 x 270 EACH CLS-1484-10 Cap, GL-45, Vented, Gray, Non-Sterile
CLS-2052
SHAKE FLASKS, 6 BAFFLES, GL-45 THREAD, VENTED CAP
Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Gray polypropylene vented cap has a 0.22µm (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached.
Item Number Item Description PQ CLS-2052-04 Flask, Shake, 250mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 80 x 125 EACH CLS-2052-06 Flask, Shake, 500mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 100 x 170 EACH CLS-2052-08 Flask, Shake, 1000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 130 x 215 EACH CLS-2052-10 Flask, Shake, 2000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 170 x 270 EACH
CLS-1490
CLOSURES, SILICONE SPONGE
The silicone sponge closure is manufactured with a sealed in .2 micron silicone sponge filter. Flange fits snugly over the necks of vessels permitting the exchange of gases, while reducing evaporation and preventing the passing of aerosols. Ideal for use with aerobic cultures. Reusable, autoclavable and will withstand dry heat sterilization up to 180°. Closure will withstand both dry heat sterilization and repeated autoclaving.
CLS-1490-013 fits: 13-18mm Culture Tubes and 18mm Screw Necks
CLS-1490-020 fits: 18-25mm Culture Tubes, 25-50mL Erlenmeyer Flasks and 25-125mL Delong® Flasks
CLS-1490-028 fits: 125 and 250mL Erlenmeyer Flasks
CLS-1490-038 fits: 38mm Delong® Style Flask or Tube Necks, 38mm Culture Tubes, 500 and 1000mL Standard Erlenmeyer Flasks and GL-45 Screw Threads
Item Number Item Description PQ CLS-1490-013 Closure, Silicone Sponge, 13mm P10 CLS-1490-020 Closure, Silicone Sponge, 20mm P10 CLS-1490-028 Closure, Silicone Sponge, 28mm P10 CLS-1490-038 Closure, Silicone Sponge, 38mm P10
CLS-1502
CLOSURES, STAINLESS STEEL
These closures are made from 305 Stainless Steel. They are ideal for use with culture tubes and flasks utilizing Delong Necks. The closure is designed with finger grips to allow it to fit firmly on any Delong Neck. It will withstand both dry heat sterilization and repeated autoclaving.
Item Number Item Description PQ CLS-1502-018 Closure, 18mm, Stainless Steel P10 CLS-1502-025 Closure, 25mm, Stainless Steel P10 CLS-1502-038 Closure, 38mm, Stainless Steel P10
CLS-1503
CLOSURES, POLYPROPYLENE
Delong style closure made of polypropylene. Closure offers two positions, open for gas exchange or closed for humidified environment. Internal drip ring minimizes contamination. Autoclavable to 121°C.
Item Number Item Description PQ CLS-1503-09 Closure, 25mm, Polypropylene P10 CLS-1503-10 Closure, 38mm, Polypropylene P10
CLS-1480
CAPS, SOLID, GL-THREADS, POLYPROPYLENE
Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.
The Premium Clear Caps are made from TpCh260 (similar to PFA) with PTFE coated silicone seal. Premium Cap Compound is formulated without colour dye to avoid risk of leaching. Premium caps can be used in temperatures from -196° to 260°C.
Item Number Item Description PQ CLS-1480-10 Cap, GL-25, Blue, Solid, Polypropylene P10 CLS-1480-11 Cap, GL-32, Blue, Solid, Polypropylene P10 CLS-1480-12 Cap, GL-32, Orange, Solid, Polypropylene P10 CLS-1480-13 DISCONTINUED: PLEASE SEE CLS-1480-13SC
Cap, GL-45, Blue, Solid, PolypropyleneCLS-1480-13SC Cap, GL-45, Schott Blue, Solid, Polypropylene P10 CLS-1480-14 Cap, GL-45, Gray, Solid, Polypropylene P10 CLS-1480-15 Cap, GL-45, Green, Solid, Polypropylene P10 CLS-1480-16 Cap, GL-45, Orange, Solid, Polypropylene P10 CLS-1480-17 Cap, GL-45, Purple, Solid, Polypropylene P10 CLS-1480-18 Cap, GL-45, Yellow, Solid, Polypropylene P10 CLS-1480-19 Cap, GL-45, Clear, Solid, Made From TpCh260
(similar to PFA) with PTFE coated silicone seal.
Compound formulated without colour dye to
avoid risk of leaching.PK5
CLS-1481
CAPS, OPEN TOPS, GL-THREADS, POLYPROPYLENE
Open top polypropylene caps for use with port assemblies. Caps can be autoclaved in steam to 140°C.
Item Number Item Description PQ CLS-1481-20 Cap, GL-32, Blue, Open Top, Polypropylene P6 CLS-1481-21 Cap, GL-45, Blue, Open Top, Polypropylene P6 CLS-1481-22 Cap, GL-45, Green, Open Top, Polypropylene P6 CLS-1481-23 Cap, GL-45, Yellow, Open Top, Polypropylene P6
CLS-1482
POURING RINGS
Steam autoclavable to 140°C. All pouring rings are polypropylene except for the CLS-1482-30 which is made of high temperature ETFE (Ethylene Tetrafluoroethylene); max temp is 180°C.
Item Number Item Description PQ CLS-1482-11 Pouring Ring, GL-32, Blue, Polypropylene P10 CLS-1482-12 Pouring Ring, GL-32, Clear, Polypropylene P10 CLS-1482-13 Pouring Ring, GL-45, Blue, Polypropylene P10 CLS-1482-14 Pouring Ring, GL-45, Green, Polypropylene P10 CLS-1482-15 Pouring Ring, GL-45, Gray, Polypropylene P10 CLS-1482-16 Pouring Ring, GL-45, Yellow, Polypropylene P10 CLS-1482-17 Pouring Ring, GL-45, Clear, Polypropylene P10 CLS-1482-30 Pouring Ring, GL-45, Red, ETFE P10
CLS-1484
CAPS, VENTED, POLYPROPYLENE, NON-STERILE
Polypropylene vented cap has a 0.22µm (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C.
Item Number Item Description PQ CLS-1484-25 Cap, GL-25, Blue, Vented, Non-Sterile, Polypropylene PK5 CLS-1484-32 Cap, GL-32, Blue, Vented, Non-Sterile, Polypropylene PK5 CLS-1484-10 Cap, GL-45, Gray, Vented, Non-Sterile, Polypropylene EACH CLS-1484-12 Cap, GL-45, Blue, Vented, Non-Sterile, Polypropylene PK5
CLS-1486
HIGH TEMPERATURE CAPS, SOLID, PBTE, PTFE SEALS
High temperature PBTE cap will withstand temperature from -45 to 200°C. Complete with PTFE seal.
Item Number Item Description PQ CLS-1486-01 High Temperature Cap, GL-32, Solid, PBTE EACH CLS-1486-02 High Temperature Cap, GL-45, Solid, PBTE EACH -
供应商的其他相关信息
查看更多
-
上海君翼仪器设备有限公司18621801483
培养摇瓶SHAKE FLASKS
页面价格仅供参考，具体请联系报价价格 价格电议,您可以向供应商询价得到该产品价格- 产品型号：培养摇瓶SHAKE FLASKS
- 品 牌：美国Chemglass
- 所 在 地：上海
- 更新日期：2025-01-17
合计：1台总价：电议（联系我时，请说明是从谷瀑网看到的，谢谢！）店内推荐产品
￥59999.00
￥9999.00
￥9999.00
￥9999.00
￥4999.00
￥4999.00
上海君翼仪器设备有限公司 电话：021-67159386 手机：18621801483 地址： 上海市松江区广富林路4855弄大业领地79栋3层内容声明：谷瀑为第三方平台及互联网信息服务提供者，谷瀑（含网站、客户端等）所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布，其真实性、准确性和合法性均由店铺经营者负责。谷瀑提醒您购买商品/服务前注意谨慎核实，如您对商品/服务的标题、价格、详情等任何信息有任何疑问的，请在购买前通过谷瀑与店铺经营者沟通确认；谷瀑上存在海量店铺，如您发现店铺内有任何违法/侵权信息，请在谷瀑首页底栏投诉通道进行投诉。
